Advantages and installation requirements of pneumatic parts

Pneumatic parts have high reliability, simple structure, simple and convenient use and maintenance, easy to adjust the output force and working speed of pneumatic parts, faster than hydraulic and electrical methods, and the service life of pneumatic parts is very long. energy to achieve centralized gas supply. By releasing energy in a short period of time, the pneumatic accessories can obtain the prompt response in intermittent motion, realize buffering, and have strong adaptability to impact loads or overloads. Under certain conditions, the starting device can be self-sustaining.

Note on the use of pneumatic components:
1. Pneumatic parts cannot be used in places with explosive gases, and cannot be used in environments with corrosive gases, organic solvents and other chemicals, as well as in environments with seawater, water and water vapor, and places where the above substances are attached.
2. It cannot be used in places with vibration and shock. If it is to be used in places with shock and vibration, the vibration resistance and shock resistance of pneumatic parts must comply with the regulations on the product sample.
3. When using pneumatic parts in places with direct sunlight, a protective cover should be added to block the sun. Do not use them in places where there is a heat source around them that will be affected by thermal radiation. If you must use them in such places, you must take measures to shield the radiant heat.
4. If it is used in places with oil and water droplets or even in places with high humidity and dust, appropriate protective measures should also be taken.

The full pneumatic control of the pneumatic valve components has the ability of fireproof, explosion-proof and moisture-proof. Compared with hydraulic methods, pneumatic components can be used in high temperature applications, and due to the small flow loss of air, compressed air can be supplied centrally and delivered over long distances.


Post time: May-09-2022