Company News

  • Pneumatic cylinder purchase skills sharing

    The quality of the actuator Pneumatic cylinder in the pneumatic system has a great influence on the overall working state of the supporting equipment. Autoair talks about the skills of everyone when purchasing pneumatic cylinders: 1. Choose a manufacturer with a high reputation, quality and servi...
    Read more
  • What is the difference between dual-axis and tri-axis pneumatic cylinder?

    Double shaft pneumatic cylinder, also known as double pneumatic cylinder, it is two piston rods, the pneumatic cylinder guide part is a shorter copper sleeve to prevent it from getting stuck, the double shaft floats to some extent and can only be used for small side To force, hands tremble; Three...
    Read more
  • Classification of aluminum rods and their uses

    Classification of aluminum rods and their uses

    Aluminium (Al) is a non-ferrous metal whose chemical substances are ubiquitous in nature. The resources of aluminum in plate tectonics are about 40-50 billion tons, ranking third only after oxygen and silicon. It is the highest metal material type in the metal material type. Aluminum has unique o...
    Read more
  • The characteristics and uses of 6061 aluminum rods

    The main alloying elements of 6061 aluminum rods are magnesium and silicon, and form Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without signif...
    Read more
  • Aluminum alloy grades and classifications

    According to the content of aluminum and other elements in the aluminum alloy: (1) Pure aluminum: Pure aluminum is divided into three categories according to its purity: high-purity aluminum, industrial high-purity aluminum and industrial-purity aluminum. Welding is mainly industrial pure aluminu...
    Read more
  • Pneumatic Actuator -Pneumatic Cylinder Classification

    Pneumatic actuators – classification of cylinders, Autoair will introduce to you. 1. Principle and classification of cylinder Cylinder principle: Pneumatic actuators are devices that convert the pressure of compressed air into mechanical energy, such as Pneumatic cylinders and air motors. I...
    Read more
  • Those situations are often encountered when placing the pneumatic cylinder

    1.The Pneumatic cylinder is mainly cast in the process of making the swing table pneumatic cylinder. The pneumatic cylinder needs to undergo aging treatment after leaving the factory, which will eliminate the internal stress generated by the pneumatic cylinder during the casting process. If the a...
    Read more
  • How to improve cylinder quality

    How to improve cylinder quality

    With the development of industrial mechanization and automation, pneumatic technicians are widely used in various fields of production automation, forming modern pneumatic technology. As one of the pneumatic components, the cylinder is the “heart” of the pneumatic system, that is, the...
    Read more
  • Precautions when using cylinders

    Precautions when using cylinders

    There are many components of pneumatic components, among which the cylinder is a widely used one. In order to improve its utilization rate, let’s take a detailed look at the places that should be paid attention to when using this product. When using the cylinder, the air quality requirement...
    Read more
  • Pneumatic Cylinder knowledge 2

    There are so many pneumatic valves, do you know the Pneumatic cylinder? 01 Basic structure of air cylinder The so-called pneumatic actuator is a component that uses compressed air as power and drives the mechanism for linear, swing and rotation motions. Take the commonly used basic pneumatic cyli...
    Read more
  • Pneumatic Cylinder knowledge

    The wear of the cylinder (Autoair is Pneumatic Cylinder Barrel Factory) mainly occurs under certain unfavorable conditions, so it should be avoided as much as possible. Let’s talk about the main measures to reduce cylinder wear: 1) Try to start the engine as “less and warm up”...
    Read more
  • Characteristics of small mini Pneumatic cylinders

    1. Lubrication-free: The small mini pneumatic cylinders adopts oil-containing bearings, so that the piston rod does not need to be lubricated. 2. Cushioning: In addition to the fixed cushioning, the pneumatic cylinders terminal also has an adjustable cushioning, so that the cylinder can be change...
    Read more
12 Next > >> Page 1 / 2