Industry News

  • Cylinder Tube Technique: Honing and Skiving Roller Burnishing

    Autoair Pneumatic is a professional manufacturer of cylinder tube, hard chrome piston rod, and induction hardened chromed shaft for pneumatic cylinder. We are proud of offering the best service and quality by using the precise method to ensure quality control. Our products are distributed around ...
    Read more
  • What is the difference between welded pipe and seamless pipe?

    The manufacturing process of a welded pipe begins at coils, which are cut by desired lengths and formed into steel plates and steel strips. The steel plates and steels strips are rolled by a rolling machine, and then form into a circular shape. In the ERW process (Electric Resistance Welded), hig...
    Read more
  • Why the cylinder tube made of aluminum?

    Why the cylinder tube made of aluminum?

    The pneumatic cylinder tube is made of aluminum alloy, which has low specific gravity, corrosion resistance, fast heat conduction, oil storage and so on. Most of the engine blocks are made of aluminum alloy. From the point of view of use, the advantages of cast aluminum pneumatic cylinders are li...
    Read more
  • Advantages and installation requirements of pneumatic parts

    Pneumatic parts have high reliability, simple structure, simple and convenient use and maintenance, easy to adjust the output force and working speed of pneumatic parts, faster than hydraulic and electrical methods, and the service life of pneumatic parts is very long. energy to achieve centraliz...
    Read more
  • Advantages Of Pneumatic Cylinders For Users

    1. The requirements for users are low. The principle and structure of the cylinder(made by cylinder tube) are simple, easy to install and maintain, and the requirements for the user are not high. Electric cylinders are different, engineers must have a certain degree of electrical knowledge, other...
    Read more
  • Pneumatic Cylinder Selection

    1. The size of the force That is, the choice of cylinder tube diameter. According to the size of the load force, the thrust and pull force output by the pneumatic cylinder are determined. Generally, the cylinder force required by the theoretical balance condition of the external load is selected,...
    Read more
  • For us we need to understand what is a pneumatic cylinder

    For us we need to understand what is a pneumatic cylinder

    When designing a hydraulic cylinder, it is necessary to know its use, as well as the working pressure and rated working pressure of the hydraulic system, the form determines the force and effect, and finally determines the cylinder bore and stroke of the hydraulic cylinder, connection method, in...
    Read more
  • What are the differences between the advantages and disadvantages of thin cylinders?

    What are the differences between the advantages and disadvantages of thin cylinders?

    Disadvantages of thin Pneumatic cylinder (made by Air Cylinders Tube) pneumatic components: 1.Due to the compressibility of air, the action speed of the air cylinder is easily changed by the change of the load. The use of gas-liquid linkage can overcome this defect. 2.When the cylinder is moving...
    Read more
  • Characteristics of stainless steel piston rod

    Characteristics of stainless steel piston rod

    Stainless steel piston rods are mainly used in hydro/pneumatic, construction machinery and automobile manufacturing. Piston rods are rolled because residual compressive stress remains in the surface layer, helping to close microscopic cracks on the surface and hindering the expansion of erosion. ...
    Read more
  • piston rod machined material

    piston rod machined material

    1. 45# steel Under normal circumstances, if the load of the piston rod is not very large, 45# steel is generally used for production. Since 45# steel is a commonly used medium carbon quenched and tempered structural steel, it has high strength and good machinability, especially when the welded ro...
    Read more
  • 304 316 Stainless steel cylinder tubes have excellent performance characteristics

    304 316 Stainless steel cylinder tubes have excellent performance characteristics

    The inner diameter of the stainless steel cylinder tube indicates the output force of the cylinder(made by 304 or 316stainless steel cylinder tubes). The piston should slide smoothly in the cylinder, and the inner surface roughness of the cylinder should reach ra0.8um. The inner surface of the st...
    Read more
  • The service life of 304 stainless steel

    The service life of 304 stainless steel

    304 stainless steel pipe(use in pneumatic cylinder) has a long service life. Judging from the use of foreign stainless steel pipes, the service life of 304 stainless steel pipes can reach 100 years in most cases, and 70 years in less cases, which is almost the same as that of buildings. Of course...
    Read more
123 Next > >> Page 1 / 3