Dual Rod Pneumatic cylinders
-
CXS Series Dual Rod Pneumatic Double-Shaft Cylinders – China Twin Rod Guided Air Cylinders for Industrial Use
·Working Medium:Air
·Motion Pattern:Double action
·Ensured Pressure Resistance:1.05Mpa(10.7kgf/cm2)
·Max.pressure:0.7Mpa(7.1kgf/cm2)
·Operating Temperature Range:5~+60℃
·Buffering:Both ends buffer
-
TN Series Double-Shaft Pneumatic Cylinders – China Dual Rod Guided Air Cylinders | Twin Rod Pneumatic Cylinders for Industrial Use
Motion Pattern:Double action
Working Medium:Air
Operating Voltage Range:1~9kgf/cm2
Ensured Pressure Resistance:10.5kgf/cm2
Operating Temperature Range:-5~+70℃
Operating Speed Range:100~500mm/s
-
CXSW Series Dual Rod Pneumatic Slide Cylinders – China Twin Rod Guided Air Cylinders for Industrial Automation
·Working Medium:Double action
·Motion Pattern:Air
·Operating Temperature Range:5﹣＋60℃
·Working pressure(MPa):0.1-1.0
·Guaranteed pressure(MPa):1.5
·Speed range(mm/s):50-200
-
JMGP Dual Rod Pneumatic Cylinders – China Twin Rod Guided Air Cylinders for Industrial Automation
・Compact: Overall length shortened by 30.5 mm, Height shortened by 16 mm
・Weight: Max. 69% lighter (0.32 kg → 0.1 kg)
・3 mounting options:
Top mounting, Bottom mounting, Rear mounting
・Piping is possible in 4 directions.
・The solid state auto switch D-M9 is mountable.
・Suitable for pushing, lifting, or clamping in a transport line.
・Guided pneumatic cylinder dual rod double
-
MGG Guide Cylinder – Dual Rod Double Guided Pneumatic Cylinders | China Twin Rod Guided Air Cylinders for Industrial Use
・Basic cylinder with integrated guide rods in a compact configuration
・A linear transfer unit that achieves lateral load resistance and high non-rotating accuracy
-
TMIC Series Dual Rod Double Guided Pneumatic Cylinders-China Twin Rod Guide Frame Air Cylinders for Industrial Automation
1. Anew type of cylinder combined with guide frame and standard cylinder.
2. Brass bearing: It is suitable for the action that has radial load
resistance. with greater torsion stiffness.
Linear bearing: It is suitable for push-up action, or where high
precision and high load capacity are required,
especially for occasions requiring low friction.
3.The special design of the guide frame body provides
amulti-directional mounting.
-
TSAI Series Dual Rod Double Guided Pneumatic Cylinders – China Twin Rod Guide Frame Air Cylinders for Industrial Use
1. Anew type of cylinder combined with guide frame and standard cylinder.
2. Brass bearing: It is suitable for the action that has radial load
resistance. with greater torsion stiffness.Linear bearing
It is suitable for push-up action, or where highprecision and high
load capacity are required,especially for occasions requiring low friction.
3. The special design of the guide frame body provides amulti-directional mounting.
4. The buffer adjustment of cylinder is smooth and steady.
5. According to the actual use requirements, combined with
sensor holder can to change the sensor installation location
-
Twin Rod Pneumatic Cylinders TN Series Double-Shaft Cylinder with Dual Rod Pneumatic Cylinders
Motion Pattern：Double action
Working Medium：Air
Operating Voltage Range：1~9 kgf/cm2
Ensured Pressure Resistance：10.5kgf/cm2
Operating Temperature Range：-5~+70℃
Operating Speed Range：100~500mm/s
