Pneumatic cylinder
-
TMIC Series Dual Rod Double Guided Pneumatic Cylinders-China Twin Rod Guide Frame Air Cylinders for Industrial Automation
1. Anew type of cylinder combined with guide frame and standard cylinder.
2. Brass bearing: It is suitable for the action that has radial load
resistance. with greater torsion stiffness.
Linear bearing: It is suitable for push-up action, or where high
precision and high load capacity are required,
especially for occasions requiring low friction.
3.The special design of the guide frame body provides
amulti-directional mounting.
-
TSAI Series Dual Rod Double Guided Pneumatic Cylinders – China Twin Rod Guide Frame Air Cylinders for Industrial Use
1. Anew type of cylinder combined with guide frame and standard cylinder.
2. Brass bearing: It is suitable for the action that has radial load
resistance. with greater torsion stiffness.Linear bearing
It is suitable for push-up action, or where highprecision and high
load capacity are required,especially for occasions requiring low friction.
3. The special design of the guide frame body provides amulti-directional mounting.
4. The buffer adjustment of cylinder is smooth and steady.
5. According to the actual use requirements, combined with
sensor holder can to change the sensor installation location
-
Twin Rod Pneumatic Cylinders TN Series Double-Shaft Cylinder with Dual Rod Pneumatic Cylinders
Motion Pattern：Double action
Working Medium：Air
Operating Voltage Range：1~9 kgf/cm2
Ensured Pressure Resistance：10.5kgf/cm2
Operating Temperature Range：-5~+70℃
Operating Speed Range：100~500mm/s
-
MGP Series Three-Shaft Model Three-Rod Pneumatic Cylinder with Guide Rod
Working Medium:Air
Motion Pattern:Double-action
Ensured Pressure Resistance:1.5Mpa(15.3kgf/cm2)
Max.Operating pressure:1.0Mpa(10.2kgf/cm2)
Min. Operating pressure:0.12Mpa(1.2kgf/cm2)
Ambient and Medium Temperature:-10~+60℃
-
OSP/OSP-P Rodless Air Cylinder Double Action Standard Long Stroke Mechanically Pneumatic Piston Rodless Air Cylinder
·Double acting with adjustable end buffer
·Magnetic pistons for position sensing
·Easy installation, the end cover can be flexibly rotated
-
DGC-K Mechanical Type Rodless Cylinder DGC-K-25/100/200/300/400-PPV-A-GK
Without guide rod, suitable for simple drive mode
Compact Installation length related to stroke
Easy installation and integration
-
SI Series ISO 6431 Standard Mickey Mouse Tube Pneumatic Cylinder
Specification Bore（mm） 32 40 50 63 80 100 125 Acting type Double acting Working medium Clean air SI Series Basic type FA FB CA CB LB TC TC-M1 TC-M2 Mounting type SID Series Basic type FA LB TC TC-M1 TC-M2 SIJ Series Basic type FA LB TC TC-M1 TC-M2 Working pressure range 0.1~1.0Mpa Guaranteed pressure 1.5Mpa Working temperature 5~70℃ Speed range SI Series：50~800mm/s other series：30~800mm/s ... -
DNC SERIES PNEUMATIC CYLINDER
Specification DNC Series ISO6431/VDMA24562 standard cylinder Bore size(mm) 32 40 50 63 80 100 125 Action Double acting,single/double rod Fluid Filtered compressed air Proof pressure 1.5Mpa Operating pressure range 0.1~1.0Mpa Ambient and fluid temperature -5~70ºC(No freezing) Port size G1/8 G1/4 G1/4 G3/8 G3/8 G1/2 G1/2 Piston rod thread Basic type M10X1.25 M12X1.25 M16X1.5 M20X1.5 M27X2.0 Cushion ... -
DSNU MA6432 SERIES STAINLESS STEEL MINI CYLINDER
Stainless steel cylinder barrel
Refined aluminum alloy bearing and end cover
High hardness piston rod
High strength, wear resistance, good fatigue resistance
Adapt to high-intensity work scenarios
The movements are smooth and not stuttering -
SC Series Standard Tie Rod Pneumatic Cylinder
Specification Bore size (mm) 32 40 50 63 80 100 125 160 200 250 Fluid Air Action Double acting, Single/Double rod Minimum operating pressure 0.1 MPa Maximum operating pressure 1.0 MPa Proof pressure 1.5 MPa Ambient and fluid temperature -20 to 80°C (No freezing) Cushion Adjustable air cushion at both ends Lubrication Non-lube Port size 1/8 1/4 3/8 1/2 3/4 1 Characteristic Double Ended Cylinders 1... -
MAL SERIES PNEUMATIC CYLINDER
MAL Series MINI Cylinder and Pneumatic Air Cylinder Basic Type Air Standard Cylinders
MAL Pneumatic Cylinders according to Airtac standard -
MA SERIES PNEUMATIC CYLINDER
MA Series Stroke Adjustable Round Double Single Acting Stainless Steel Mini Air Pneumatic Cylinder
MA Pneumatic Cylinders according to ISO6432 standard
